OruxMaps
Visit the new forum: <a href="http://www.oruxmaps.com/foro">OruxMaps</a>

UTM projection in batch mode not recognized?

Go down

UTM projection in batch mode not recognized? Empty UTM projection in batch mode not recognized?

Post  Rowiku on Sun May 02, 2010 4:48 pm

Hi!
I have a huge collection of .map in WGS84 / UTM to convert, but batch converter mode don't recognize it.
In converter mode there is no problem when I choose UTM and calibration is good.
Is there a way to use batch converter mode with WGS84 / UTM?

Thanks for your works, It's a great apps!


Code:

OziExplorer Map Data File Version 2.2


ALLOS.bmp

1, Map Code,

WGS 84,WGS 84,  0.0000,  0.0000,WGS 84

Reserved 1

Reserved 2

Magnetic Variation,,,E

Map Projection,(UTM)Universal Transverse Mercator,PolyCal,No,AutoCalOnly,No,BSBUseWPX,No

Point01,xy,    0,    0,in, deg,  44, 17.2961,N, 006, 35.6925,E, grid,  ,          ,          ,N

Point02,xy,    0, 4000,in, deg,  44, 11.9091,N, 006, 35.2864,E, grid,  ,          ,          ,N

Point03,xy, 4000, 4000,in, deg,  44, 11.6132,N, 006, 42.7739,E, grid,  ,          ,          ,N

Point04,xy,    ,    ,in, deg,    ,        ,N,    ,        ,E, grid,  ,          ,          ,N

Point05,xy,    ,    ,in, deg,    ,        ,N,    ,        ,E, grid,  ,          ,          ,N

Point06,xy,    ,    ,in, deg,    ,        ,N,    ,        ,E, grid,  ,          ,          ,N

Point07,xy,    ,    ,in, deg,    ,        ,N,    ,        ,E, grid,  ,          ,          ,N

Point08,xy,    ,    ,in, deg,    ,        ,N,    ,        ,E, grid,  ,          ,          ,N

Point09,xy,    ,    ,in, deg,    ,        ,N,    ,        ,E, grid,  ,          ,          ,N

Point10,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point11,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point12,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point13,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point14,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point15,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point16,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point17,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point18,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point19,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point20,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point21,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point22,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point23,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point24,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point25,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point26,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point27,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point28,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point29,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Point30,xy,    ,    ,in, deg,    ,        ,,    ,        ,, grid,  ,          ,          ,

Projection Setup,,,,,,,,,,

Map Feature = MF ; Map Comment = MC    These follow if they exist

Track File = TF      These follow if they exist

Moving Map Parameters = MM?    These follow if they exist

MM0,Yes

MMPNUM,4

MMPXY,1,0,0

MMPXY,2,4000,0

MMPXY,3,4000,4000

MMPXY,4,0,4000

MMPLL,1,  6.594875,  44.288271

MMPLL,2,  6.719666,  44.283339

MMPLL,3,  6.712899,  44.193553

MMPLL,4,  6.588108,  44.198485

MM1B,2.494000

MOP,Map Open Position,0,0

IWH,Map Image Width/Height,4000,4000



Last edited by Rowiku on Sun May 02, 2010 8:35 pm; edited 2 times in total (Reason for editing : added a .map)

Rowiku

Cantidad de envíos : 2
Fecha de inscripción : 2010-05-02

Back to top Go down

UTM projection in batch mode not recognized? Empty Re: UTM projection in batch mode not recognized?

Post  orux on Sun May 02, 2010 9:00 pm

Rowiku wrote:Hi!
I have a huge collection of .map in WGS84 / UTM to convert, but batch converter mode don't recognize it.
In converter mode there is no problem when I choose UTM and calibration is good.
Is there a way to use batch converter mode with WGS84 / UTM?

Thanks for your works, It's a great apps!

Map Projection,(UTM)Universal Transverse Mercator,PolyCal,No,AutoCalOnly,No,BSBUseWPX,No

Hi, Rowiku;

Try this:
replace-->(UTM)Universal Transverse Mercator
by-->(UTM) Universal Transverse Mercator

There is an space after (UTM).
Have you write by hand this file?

orux
orux
orux

Cantidad de envíos : 3946
Fecha de inscripción : 2009-07-06

Back to top Go down

UTM projection in batch mode not recognized? Empty Re: UTM projection in batch mode not recognized?

Post  Rowiku on Mon May 03, 2010 8:47 pm

Thanks! That was the problem! I had modified all my .map with your "translator" tools Wink It's so easy...
I haven't edited by hand, seems that's a bug of the program I use (GPStrack 2008)
Thanks again!

Rowiku

Cantidad de envíos : 2
Fecha de inscripción : 2010-05-02

Back to top Go down

UTM projection in batch mode not recognized? Empty RE: UTM projection in batch mode not recognized?

Post  Pierre on Mon May 16, 2011 3:18 pm

Hola!
I have a collection of .map in WGS84 / UTM to convert, but batch converter failed.
In converter mode there is no problem when I choose UTM and calibration is good.
The .map come form GPSTrack 2008, and I have already replaced
(UTM)Universal Transverse Mercator
in
(UTM) Universal Transverse Mercator
On every map, I get:
Failed:C:\.............\mapName.map!!

Thanks for your works, It's a great apps!

The .map:

1, Map Code,
WGS 84,WGS 84, 0.0000, 0.0000,WGS 84
Reserved 1
Reserved 2
Magnetic Variation,,,E
Map Projection,(UTM) Universal Transverse Mercator,PolyCal,No,AutoCalOnly,No,BSBUseWPX,No
Point01,xy, 0, 0,in, deg, 46, 01.4973,N, 008, 49.6151,E, grid, , , ,N
Point02,xy, 7000, 0,in, deg, 46, 01.3167,N, 009, 03.1713,E, grid, , , ,N
Point03,xy, 0, 4800,in, deg, 45, 55.0231,N, 008, 49.4508,E, grid, , , ,N
Point04,xy, 7000, 4800,in, deg, 45, 54.8428,N, 009, 02.9805,E, grid, , , ,N
Point05,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point06,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point07,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point08,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point09,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point10,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point11,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point12,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point13,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point14,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point15,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point16,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point17,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point18,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point19,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point20,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point21,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point22,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point23,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point24,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point25,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point26,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point27,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point28,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point29,xy, , ,in, deg, , ,, , ,, grid, , , ,
Point30,xy, , ,in, deg, , ,, , ,, grid, , , ,
Projection Setup,,,,,,,,,,
Map Feature = MF ; Map Comment = MC These follow if they exist
Track File = TF These follow if they exist
Moving Map Parameters = MM? These follow if they exist
MM0,Yes
MMPNUM,4
MMPXY,1,0,0
MMPXY,2,7000,0
MMPXY,3,7000,4800
MMPXY,4,0,4800
MMPLL,1, 8.827030, 46.024955
MMPLL,2, 9.052745, 46.021948
MMPLL,3, 9.049785, 45.914047
MMPLL,4, 8.824070, 45.917053
MM1B,2.497286
MOP,Map Open Position,0,0
IWH,Map Image Width/Height,7000,4800

Pierre
Guest


Back to top Go down

UTM projection in batch mode not recognized? Empty Re: UTM projection in batch mode not recognized?

Post  orux on Mon May 16, 2011 4:34 pm

Pierre wrote:Hola!
I have a collection of .map in WGS84 / UTM to convert, but batch converter failed.
In converter mode there is no problem when I choose UTM and calibration is good.
The .map come form GPSTrack 2008, and I have already replaced
(UTM)Universal Transverse Mercator
in
(UTM) Universal Transverse Mercator
On every map, I get:
Failed:C:\.............\mapName.map!!

Thanks for your works, It's a great apps!

The .map:

1, Map Code,


Hi, Pierre;

The header of the map file is right?
I can not see the Ozi header + the map name:

OziExplorer Map Data File Version 2.2
xxxxxxx.png
1, Map Code,
...

_________________
Ahora puedes contribuir:--> DONACIÓN
Now you can contribute:--> DONATE
orux
orux

Cantidad de envíos : 3946
Fecha de inscripción : 2009-07-06

Back to top Go down

UTM projection in batch mode not recognized? Empty Re: UTM projection in batch mode not recognized?

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum