ozf2 in 5.5.3

Hi Orux,
Just updated to 5.5.3 after seeing it can load ozf2 files. I've copied a test ozf2 to the maps dir and refreshed maps db but still cannot see the ozf2 map
Here is the .map file created with img2ozf v2.08 (the last version to support ozf2):

OziExplorer Map Data File Version 2.2
testozi 14.png
testozi 14.ozf2
1 ,Map Code,
WGS 84,WGS 84, 0.0000, 0.0000,WGS 84
Reserved 1
Reserved 2
Magnetic Variation,,,E
Map Projection,Mercator,PolyCal,No,AutoCalOnly,No,BSBUseWPX,No
Point01,xy, 0, 0,in, deg, 53, 49.595805, N, 1, 53.378906, W, grid, , , ,N
Point02,xy, 4863, 0,in, deg, 53, 49.595805, N, 1, 28.335228, W, grid, , , ,N
Point03,xy, 4863, 2303,in, deg, 53, 42.585863, N, 1, 28.335228, W, grid, , , ,N
Point04,xy, 0, 2303,in, deg, 53, 42.585863, N, 1, 53.378906, W, grid, , , ,N
Point05,xy, , ,in, deg, , , grid, , , ,N
Point06,xy, , ,in, deg, , , grid, , , ,N
Point07,xy, , ,in, deg, , , grid, , , ,N
Point08,xy, , ,in, deg, , , grid, , , ,N
Point09,xy, , ,in, deg, , , grid, , , ,N
Point10,xy, , ,in, deg, , , grid, , , ,N
Point11,xy, , ,in, deg, , , grid, , , ,N
Point12,xy, , ,in, deg, , , grid, , , ,N
Point13,xy, , ,in, deg, , , grid, , , ,N
Point14,xy, , ,in, deg, , , grid, , , ,N
Point15,xy, , ,in, deg, , , grid, , , ,N
Point16,xy, , ,in, deg, , , grid, , , ,N
Point17,xy, , ,in, deg, , , grid, , , ,N
Point18,xy, , ,in, deg, , , grid, , , ,N
Point19,xy, , ,in, deg, , , grid, , , ,N
Point20,xy, , ,in, deg, , , grid, , , ,N
Point21,xy, , ,in, deg, , , grid, , , ,N
Point22,xy, , ,in, deg, , , grid, , , ,N
Point23,xy, , ,in, deg, , , grid, , , ,N
Point24,xy, , ,in, deg, , , grid, , , ,N
Point25,xy, , ,in, deg, , , grid, , , ,N
Point26,xy, , ,in, deg, , , grid, , , ,N
Point27,xy, , ,in, deg, , , grid, , , ,N
Point28,xy, , ,in, deg, , , grid, , , ,N
Point29,xy, , ,in, deg, , , grid, , , ,N
Point30,xy, , ,in, deg, , , grid, , , ,N
Projection Setup,,,,,,,,,,
Map Feature = MF ; Map Comment = MC These follow if they exist
Track File = TF These follow if they exist
Moving Map Parameters = MM? These follow if they exist
MM0,Yes
MMPNUM,4
MMPXY, 1, 0, 0
MMPXY, 2, 4863, 0
MMPXY, 3, 4863, 2303
MMPXY, 4, 0, 2303
MMPLL, 1, -1.889648, 53.826597
MMPLL, 2, -1.472254, 53.826597
MMPLL, 3, -1.472254, 53.709764
MMPLL, 4, -1.889648, 53.709764
MOP,Map Open Position,0,0
MM1B, 5.665130
IWH,Map Image Width/Height, 4864, 2304


Do I need to edit the .map file in any way?

Other than that - lovin' Oruxmaps!!! Thanks!!!

petesx wrote:Hi Orux,
Just updated to 5.5.3 after seeing it can load ozf2 files. I've copied a test ozf2 to the maps dir and refreshed maps db but still cannot see the ozf2 map
Here is the .map file created with img2ozf v2.08 (the last version to support ozf2):

OziExplorer Map Data File Version 2.2
testozi 14.png
testozi 14.ozf2
1 ,Map Code,
WGS 84,WGS 84,   0.0000,   0.0000,WGS 84
Reserved 1
Reserved 2
Magnetic Variation,,,E
....


Do I need to edit the .map file in any way?

Other than that - lovin' Oruxmaps!!! Thanks!!!

Hi;

the name of your files inside oruxmaps maps folder must be:
testozi 14.map
testozi 14.ozf2

if you do not see the map in the map list, refresh the list (round button up-right).

orux

Thanks Orux, the map now displays (for info the default name for the .map file that img2ozf.exe generates is in this case testozi 14_ozf.map - once renamed it loaded)
However, there is still a problem. The map displays but when I swipe to move the map right it moves left, when I swipe up it moves down. When I switch map here it only shows the world map, none of my other maps for that area, and if I choose world map and zoom in it's approximately the right longitude but latitude is between South Africa and Antartica (The map should be in the UK). If I switch GPS on it prompts to load a differnt map as soon as it gets a fix. In oziexplorer the map behaves correctly and is at the right location.
Thanks in advance.
Pete

petesx wrote:Thanks Orux, the map now displays (for info the default name for the .map file that img2ozf.exe generates is in this case testozi 14_ozf.map - once renamed it loaded)
However, there is still a problem. The map displays but when I swipe to move the map right it moves left, when I swipe up it moves down. When I switch map here it only shows the world map, none of my other maps for that area, and if I choose world map and zoom in it's approximately the right longitude but latitude is between South Africa and Antartica (The map should be in the UK). If I switch GPS on it prompts to load a differnt map as soon as it gets a fix. In oziexplorer the map behaves correctly and is at the right location.
Thanks in advance.
Pete

Hmm,

there is a bug reading the .map file; meanwhile I solve the problem, you can use the map if you remove the white space before the 'N' letter:

Point01,xy, 0, 0,in, deg, 53, 49.595805, N, 1, 53.378906, W, grid, , , ,N
Point02,xy, 4863, 0,in, deg, 53, 49.595805, N, 1, 28.335228, W, grid, , , ,N
Point03,xy, 4863, 2303,in, deg, 53, 42.585863, N, 1, 28.335228, W, grid, , , ,N
Point04,xy, 0, 2303,in, deg, 53, 42.585863, N, 1, 53.378906, W, grid, , , ,N

replace the file, then refresh the map list with the round up-right button.

orux

 Thank you sir, you're a genius! Now I can use the same maps on my PC as my phone - would still rather you wrote a native Linux OruxMaps though so I could get rid of OziExplorer on wine.......

For info, the leading space before the N is present only in map files created by Mobile Atlas Creator (I'm using 1.9.14) - it's not there in old files I created within OziExplorer.

petesx wrote:For info, the leading space before the N is present only in map files created by Mobile Atlas Creator (I'm using 1.9.14) - it's not there in old files I created within OziExplorer.

 Thanks,

but it is my fault, I have had to remove white spaces.

orux